Uniview NSW2010-6T-POE-S-IN unmanaged PoE switch, 6 ports with 4 PoE

Manufacturer product photo · 6-port unmanaged PoE switch

NSW2010-6T-POE-S-IN

Name: NSW2010-6T-POE-S-IN
Brand: Uniview

Uniview · PoE Switch

Unmanaged Fast Ethernet PoE Switch · 6×10/100M (4 PoE) + 2 Uplink

Project-Based Pricing

Volume & combo discounts — get your quote

In-stock models: 3 days to your designated warehouse after payment · Out-of-stock or insufficient stock: 7–15 working days

Get Best Price on WhatsApp

HOW TO GET A BETTER PRICE

Volume DiscountOrder 50+ pcs of this model

Project Combo DiscountMix any categories & models storewide in one order — no quantity limit

BIGGER

Verified End-User DiscountEnd user with a real project? Send your requirements / BOQ — best price, plus professional system design & planning advice

BIGGEST

All discounts are quoted personally — message me on WhatsApp ↑

Overview

The NSW2010-6T-POE-S-IN is an unmanaged Fast Ethernet PoE switch with 6 × 10/100Mbps RJ45 ports — 4 PoE-enabled downlink ports plus 2 uplink ports — built for plug-and-play CCTV deployments. It delivers a 60 W total PoE power budget (30 W max per port, Mode A pinout: 1/2+, 3/6-) over a 1.2 Gbps switching fabric with 0.90 Mpps forwarding, a 768K bit packet buffer and a 2K MAC address table. A fanless 200×118×44 mm metal housing (0.54 kg) runs from -10°C to 50°C and switches between Normal, EXTEND (250 m surveillance reach) and VLAN working modes via a front-panel DIP switch — no management software required.

Is This the Right Fit?

Six real deployment scenarios matched to this model's actual datasheet specifications.

Micro-Site 4-Camera Plug-and-PlayNo CLI or web login — flip the front-panel DIP switch to Normal, EXTEND or VLAN mode and power up to four cameras in minutes; sized for a single shop counter, small office or guard booth.

Compact Companion for a Home/SOHO NVR60 W PoE budget and 4 PoE ports match a typical 4-channel home or SOHO NVR kit — one small switch handles power and uplink for the whole camera set without a separate injector.

250 m Reach for a Single Remote CameraEXTEND mode stretches PoE and data past the standard 100 m Ethernet limit to 250 m — bring in one distant gate, driveway or lot camera on this switch instead of adding a repeater or media converter.

Fanless 0.54 kg Footprint, Tuck Anywhere0 cooling fans keep the 200×118×44 mm, 0.54 kg metal case silent — mounts on a desk, shelf or wall bracket beside a DVR/NVR without fan noise or forced-air clearance.

Isolated POS/Kiosk DownlinkVLAN (secure) mode restricts the four downlink ports to talk only with the uplink port — keep a point-of-sale terminal or self-service kiosk's traffic separate from camera ports without configuring real VLANs.

Small Switch, Full Fault-Analysis IndicatorsDedicated PWR / SW(DIP) / 1-6 Link&Data indicators on the front panel let installers confirm each of the six ports and the active working mode at a glance — no laptop needed for a quick field health check.

Not a good fit if:

Unmanaged — no Web/CLI/SNMP access, VLAN tagging or per-port traffic statistics; choose a managed switch if you need remote configuration or monitoring.
Fast Ethernet only (10/100Mbps, no Gigabit) — for 4K or multi-stream camera backbones and NVR uplinks, choose a Gigabit PoE switch instead.
30 W max per port and 60 W total budget — not all 4 PoE ports can run at full 30 W simultaneously (4×30 W = 120 W > 60 W budget), and 802.3bt heated PTZ domes (60–90 W) need a bt-capable switch or midspan injector.

Key Features

6 × 10/100Mbps RJ45 ports, including 4 PoE-enabled downlink ports
60 W total PoE budget, up to 30 W per port, Mode A pinout (1/2+, 3/6-)
IEEE 802.3x full-duplex flow control and half-duplex back-pressure congestion control
Auto MDI/MDIX port flip — connects with any straight-through or crossover cable
Automatic power adaptation to connected PoE devices
Front-panel PWR/Link/DIP indicators for status monitoring and fault analysis
Three working modes via DIP switch: Normal, EXTEND (250 m) and VLAN (secure downlink)

Specifications

IEEE Standards

IEEE802.3 / 802.3u	10/100Base Ethernet
IEEE802.3x	Flow control (full-duplex) & back-pressure (half-duplex)

Ports

Total ports	6 × 10/100Mbps RJ45
PoE ports	4 (of 6)
Uplink ports	2 × 10/100Mbps RJ45
MDI/MDIX	Auto (auto flip)

Performance

Switching capacity	1.2 Gbps
Forwarding rate	0.90 Mpps
Packet buffer	768K bit
MAC address table	2K

PoE

Total budget	60 W
Per port	30 W
Pin mode	Mode A: 1/2(+), 3/6(-)

Power & Environment

Max. power consumption	65 W
Cooling	Fanless (0 fans)
Operating temp.	-10°C ~ 50°C (14°F ~ 122°F)
Humidity	10% ~ 90% non-condensing
Dimensions (W×D×H)	200 × 118 × 44 mm
Package dimensions	245 × 190 × 60 mm
Weight	0.54 kg
Indicators	PWR · SW (DIP) · 1-6 Green (Link&Data)
Working modes	Normal / EXTEND (250 m) / VLAN — via DIP switch