Uniview NSW2020-16T2GC-LPOE-IN unmanaged 19-inch rack PoE switch, 16 ports with PoE, dual Combo uplink, low-power 150W

Manufacturer product photo · 16-port rack-mount unmanaged PoE switch with dual Combo uplinks, low-power 150W

NSW2020-16T2GC-LPOE-IN

Name: NSW2020-16T2GC-LPOE-IN
Brand: Uniview

Uniview · PoE Switch

Unmanaged 19″ Rack PoE Switch · 16×100M PoE + 2×1000M Combo Uplink · 150W Low-Power

Project-Based Pricing

Volume & combo discounts — get your quote

In-stock models: 3 days to your designated warehouse after payment · Out-of-stock or insufficient stock: 7–15 working days

Get Best Price on WhatsApp Need the PDF datasheet? Get it on WhatsApp →

HOW TO GET A BETTER PRICE

Volume DiscountOrder 50+ pcs of this model

Project Combo DiscountMix any categories & models storewide in one order — no quantity limit

BIGGER

Verified End-User DiscountEnd user with a real project? Send your requirements / BOQ — best price, plus professional system design & planning advice

BIGGEST

All discounts are quoted personally — message me on WhatsApp ↑

Overview

The NSW2020-16T2GC-LPOE-IN is an unmanaged 19-inch rack-mount Fast Ethernet PoE switch with 16 × 100Mbps RJ45 PoE ports (priority ports 1-8) plus two 1000Mbps Combo RJ45/SFP uplinks (G1/SFP1, G2/SFP2), built as the low-power variant in this switch family, for machine-room and wiring-closet camera aggregation where a smaller PoE budget is enough. It delivers a 150 W total PoE budget (30 W max per port, IEEE 802.3af/at, both Mode A (1,2/3,6) and Mode B (4,5/7,8) pinout support) over the same 7.2 Gbps switching fabric with 5.36 Mpps forwarding, a 4M bit packet buffer and a 16K MAC address table, cooled passively with zero internal fans and powered from a built-in AC 100–240V supply (160 W max). The all-metal 440×195×44 mm 1U chassis (1.93 kg) runs from 0°C to 45°C and switches between Default (Normal), VLAN (Secure, downlink-to-uplink only, with PD keepalive to reboot unresponsive PoE cameras) and EXTEND (250 m surveillance reach) via a front-panel slide switch — no management software required, NDAA compliant.

Is This the Right Fit?

Six real deployment scenarios matched to this model's actual datasheet specifications.

Fanless Design Keeps Noise Out of Offices, Retail Counters and Reception AreasZero internal cooling fans mean no moving parts and no fan noise — ideal for switches mounted in open-plan offices, retail point-of-sale counters or reception desks where fan hum on a higher-power sibling model would be noticeable, without giving up any of the same 16-port PoE switching capability.

150 W Budget Sized for Standard Fixed-Lens Cameras, Not Idle Headroom You Pay ForA typical 10/100Mbps fixed IP camera draws around 6–9 W, so 16 ports at 9 W each use 144 W — comfortably inside the 150 W budget without paying for the extra headroom of a higher-power sibling model that a standard-camera deployment never actually uses.

Priority Ports 1-8 Matter More Under a Tighter 150 W CeilingWith less spare budget than a higher-power sibling model, ports 1-8 keep PoE power priority so entrance, corridor or server-room cameras wired to those ports stay powered first if combined draw across all 16 ports approaches the 150 W limit.

Mode A + Mode B PoE Pinout Still Covers Mixed-Vendor PD CamerasThe low-power PoE controller keeps the same dual-pinout support as its higher-power sibling model — Mode A (1,2/3,6) and Mode B (4,5/7,8) — so mixed-vendor cameras from an existing project can move to this switch without a pinout compatibility check port by port.

VLAN Secure Mode with PD Keepalive for Small Branch and Retail SitesFlip the front-panel switch to VLAN (Secure) mode so downlink ports can only reach the uplink, and let PD keepalive auto-reboot any camera that stops responding — useful for small branch offices or retail stores without local IT staff to reset a frozen camera by hand.

EXTEND Mode Reaches a Single Perimeter Camera to 250 m From a Compact Fanless SwitchFlip the same front-panel switch to EXTEND (surveillance mode) to push power and data up to 250 m for one gate, fence-line or driveway camera — the fanless housing fits into a small wall cabinet near the entrance without needing forced-air clearance.

Not a good fit if:

150 W total budget is far tighter than a higher-power sibling model — 16 ports at the 30 W/port max would need 480 W, and even a full set of typical 9 W fixed cameras (144 W) leaves under 6 W of spare headroom across the whole switch; for higher-draw PTZ domes, multi-stream cameras, or projects that need real power headroom on every port, choose a higher-power PoE switch sibling instead (see Related Products below).
Downlink ports are Fast Ethernet only (10/100Mbps, no Gigabit) — for 4K or multi-stream cameras that need gigabit throughput per port, choose a Gigabit PoE switch; only the two Combo uplinks (G1/SFP1, G2/SFP2) run at 1000Mbps.
Unmanaged — no Web/CLI/SNMP access or per-port VLAN tagging; the front-panel switch offers only Default/VLAN/EXTEND positions, not granular configuration; choose a managed switch if you need remote monitoring or individual port control.

Key Features

16 × 100Mbps RJ45 PoE ports (priority ports 1-8) plus two 1000Mbps Combo RJ45/SFP uplinks (G1/SFP1, G2/SFP2)
150 W total PoE budget, up to 30 W per port, IEEE 802.3af/at, dual pinout support — Mode A (1,2/3,6) and Mode B (4,5/7,8)
Ports 1-8 hold PoE power priority under budget contention
Three working modes via front-panel slide switch: Default (Normal), VLAN (Secure, downlink-to-uplink only), EXTEND (250 m surveillance reach)
VLAN (Secure) mode includes PD keepalive: automatically power-cycles an unresponsive PoE camera when it stops sending data
IEEE 802.3x flow control, port traffic control and packet buffer optimization for smoother multi-camera streaming
All-metal 440×195×44 mm 1U rack chassis, fanless (0 internal cooling fans) design, NDAA compliant

Specifications

IEEE Standards

IEEE802.3 / 802.3u	10/100Base Ethernet
IEEE802.3ab	1000Base-T Gigabit Ethernet (copper)
IEEE802.3z	1000Base-X Gigabit Ethernet (fiber)
IEEE802.3az	Energy Efficient Ethernet (EEE)
IEEE802.3x	Flow control
IEEE802.3af / 802.3at	PoE / PoE+ power sourcing

Ports

Total ports	16 × 100Mbps RJ45 (PoE) + 2 × 1000Mbps Combo (RJ45/SFP)
PoE ports	16 (ports 1–16)
Uplink ports	2 × 1000Mbps Combo RJ45/SFP (G1/SFP1, G2/SFP2)
Priority ports	1–8 (PoE power priority)

Performance

Switching capacity	7.2 Gbps
Forwarding rate	5.36 Mpps
Packet buffer	4M bit
MAC address table	16K

PoE

Total budget	150 W
Per port	30 W max
PoE standard	IEEE 802.3af / 802.3at
Pin mode	Mode A (1,2/3,6) + Mode B (4,5/7,8)

Power & Environment

Power input	AC 100–240V, 50/60Hz (built-in)
Max. power consumption	160 W
Cooling	Fanless (0 internal fans)
Operating temp.	0°C ~ 45°C (32°F ~ 113°F)
Humidity	10% ~ 90% non-condensing
Dimensions (W×D×H)	440 × 190 × 44 mm
Weight	1.93 kg
Indicators	POWER · PoE · PoE-MAX · LINK/ACT
Working modes	Default (Normal) / VLAN (Secure) / EXTEND (250 m) — front-panel slide switch
PD keepalive	In VLAN mode, auto power-cycles a PoE camera if no data is received for a set period
Compliance	NDAA compliant