Manufacturer product photo · 4×FE + 1×Fixed Fiber
ZJIES1000D-4T1S
Unmanaged · Copper + Fiber Hybrid
Unmanaged Industrial DIN-Rail Switch · 6×FE Copper + 4×GE Fixed Fiber · AC 220V / DC 24V/48V
Project-Based Pricing
Volume & combo discounts — get your quote
In-stock models: 3 days to your forwarder's warehouse in China after payment · Out-of-stock: 7–15 working days · then air 5–10 days or sea 25–45 days to your port
✓ Project-level customization & OEM supported
Get Best Price on WhatsAppRequest a quote ↓Terms · Sample orders welcome · Quotation / PI fixes models, prices, Incoterms (EXW or FOB, each quoted separately), lead time and T/T payment · Defective units: free spare units agreed per order (quantity depends on order size) and written into the quotation · Warranty: up to 5 years on Zhongxin Shutong industrial switches, manufacturer warranty on other brands · Full terms, warranty & RMA
Need the PDF datasheet? Get it on WhatsApp →How to get a better price
Volume DiscountOrder 50+ pcs of this model
CONTACT US
Project Combo DiscountMix any categories & models storewide in one order — no quantity limit
BIGGER
Verified Project DiscountDistributor, integrator or end user with a real project? Send the BOQ — project pricing plus free system design. Partner projects are protected: we never quote your end customer behind you
BIGGEST
All discounts are quoted personally — message me on WhatsApp ↑
◆Fast Ethernet + Gigabit Fiber
◆Unmanaged Plug&Play
◆DIN-Rail / Wall Mount
◆AC220V / DC24V/48V
◆-40 ~ 75°C · IP40 Enclosure
◆5-Year Warranty
Overview
The ZJIES1000D-4T1S series is an unmanaged DIN-rail switch with fiber uplinks, combining 6 × 10/100Base-T copper access ports with 4 × fixed 10/100/1000Base-FX Gigabit fiber ports (SC, ST or FC connector optional, single- or dual-fiber optional) in one compact unit. It is plug-and-play with no configuration required, uses store-and-forward switching, and ships in a compact IP40 metal enclosure (45×175×143 mm) for DIN-rail or wall mounting. Powered by AC 220V (100–240V) single input or DC 24V (12–36V) / 48V (36–56V) redundant dual input with reverse-polarity and overload protection, it operates from -40 to +75°C — suited for sites that need to aggregate several near-end copper links onto a long-haul Gigabit fiber uplink.
Is This the Right Fit?
Six real deployment scenarios matched to this model's actual datasheet specifications.
DIN-Rail Cabinet Installation, Any Power TypeThree selectable power inputs — AC 220V (100–240V) single input, DC 24V (12–36V) redundant, or DC 48V (36–56V) redundant — and a compact 45×175×143 mm DIN-rail (or wall-mount) body fit directly into a standard electrical cabinet.
Long-Haul Fiber Backhaul for Roadside & Perimeter SitesThe 4 fixed 10/100/1000Base-FX Gigabit fiber ports (SC/ST/FC connector optional) reach up to 2 km over multimode or 20/40/60/120 km over single-mode, long enough to backhaul roadside or perimeter camera clusters to a control room.
Copper Access + Fiber Uplink AggregationThe 6 × 10/100Base-T copper ports collect traffic from local end devices while the 4 fixed Gigabit fiber ports carry it out over a long-distance fiber uplink — suited for sites mixing near-end copper drops with a fiber backbone.
Built-In Media Conversion — No Separate Converter NeededBecause the 4 fiber ports are factory-fixed (not SFP slots), with connector type (SC/ST/FC) and single-/dual-fiber preset at order, each port doubles as a copper-to-fiber media converter — saving a standalone converter at every copper/fiber junction point.
Extreme-Temperature Outdoor CabinetsA wide operating range of -40 to +75°C (-40 to +85°C storage) plus EN61000-4 Level 3 EMC immunity suit unheated roadside cabinets and unconditioned equipment rooms.
Redundant Power for Tunnel & Underground M&E RoomsThe DC 24V (12–36V) or DC 48V (36–56V) models take dual redundant input with reverse-polarity and overload protection, while an AC 220V single-input model is also available — matched to whichever supply is already run in tunnel or underground utility rooms.
Not a good fit if:
- Unmanaged switch — no VLAN, RSTP/MSTP ring redundancy, or web-based management; choose a managed model for segmented or ring-topology networks.
- No PoE output on any of the 6 copper ports — cameras, APs, or IP phones needing PoE power require an external injector or a PoE-capable switch.
- Fiber connector type (SC/ST/FC) and distance class (multimode/single-mode) are fixed at the factory per order — they cannot be swapped in the field the way SFP modules can.
Key Features
- Unmanaged plug-and-play — zero configuration
- Up to 6 × 10/100Base-T Fast Ethernet copper ports
- Up to 4 × fixed 10/100/1000Base-FX Gigabit fiber ports (SC/ST/FC optional)
- AC 220V (100–240V) or DC 24V/48V redundant dual input
- DIN-rail mounting (default) · wall-mount optional · compact 45×175×143 mm
- IP40 metal enclosure · wide temperature -40 ~ +75°C
- Reverse-polarity & overload protection · 5-year warranty
Specifications
IEEE Standards
| IEEE802.3 | 10BaseT Ethernet |
| IEEE802.3u | 100Base-T(X) & 100Base-FX Fast Ethernet |
| IEEE802.3z | 1000Base-X Ethernet |
| IEEE802.3x | Flow Control |
Switching
| MAC Address Table | 4K |
| Packet Buffer | 1 Mbit |
| Forwarding | Store-and-forward |
Interfaces
| RJ45 Ports | 6 × 10/100Base-T |
| Fiber Ports | 4 × fixed 10/100/1000Base-FX, single-/multi-mode optional, SC/ST/FC optional, single-/dual-fiber optional |
| Fiber Distance | Multimode 2 km; single-mode 20/40/60/120 km optional |
| LED Indicators | Power, Copper Link, Fiber Link |
Power
| DC 24V Input | 4-pin terminal, dual redundant input; DC 24V, range 12–36V DC |
| DC 48V Input | 4-pin terminal, dual redundant input; DC 48V, range 36–56V DC |
| AC 220V Input | 4-pin terminal, single power; AC 220V, range 100–240V AC |
| Power Consumption | Max 6 W |
| Power Protection | Reverse-polarity & overload |
Physical
| Housing | IP40 metal enclosure |
| Mounting | DIN-rail (default), wall-mount optional |
| Dimensions | 45 (W) × 175 (H) × 143 (D) mm |
Certification
| EMC | CE, FCC |
| EMI | FCC Part 15, EN 55032 (CISPR 32) Class A |
| EMS | EN61000-4-2/3/4/5/6/8 Level 3 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Green | RoHS, WEEE |
Environment
| Standard Temp | -10 ~ +60°C |
| Wide Temp | -40 ~ +75°C |
| Storage Temp | -40 ~ +85°C |
| Humidity | 5–95% non-condensing |
Reliability
| MTBF | 320,000 hours |
| Warranty | 5 years |
Models & Ordering
| Model | Product Description | Price |
|---|---|---|
| ZJIES1000D-4T1S-AC | Unmanaged industrial DIN-rail switch — 6 × 10/100Base-T + 4 × fixed 10/100/1000Base-FX Gigabit fiber (SC/ST/FC optional), AC 220V (100–240V). | |
| ZJIES1000D-4T1S-DCL | Unmanaged industrial DIN-rail switch — 6 × 10/100Base-T + 4 × fixed 10/100/1000Base-FX Gigabit fiber (SC/ST/FC optional), DC 24V (12–36V), redundant input. | |
| ZJIES1000D-4T1S-DCH | Unmanaged industrial DIN-rail switch — 6 × 10/100Base-T + 4 × fixed 10/100/1000Base-FX Gigabit fiber (SC/ST/FC optional), DC 48V (36–56V), redundant input. |
All three configurations share the same port layout — 6 × 10/100Base-T copper + 4 × fixed 10/100/1000Base-FX Gigabit fiber (SC/ST/FC connector, single-/dual-fiber optional; multimode 2 km or single-mode 20/40/60/120 km). They differ only in power input: -AC = AC 220V (100–240V) single input; -DCL = DC 24V (12–36V) redundant dual input; -DCH = DC 48V (36–56V) redundant dual input.
Dimensions
unit: mm
Your Brand. Factory-Direct Supply.Neutral casing, ready for your logo · Custom port/power options · Small batches welcome.
Custom & OEM →Who uses it, where it goes and how to install it
Written for the ZJIES1000D-4T1S from the manufacturer's datasheet: unmanaged, 4 × 10/100Base-T RJ45 + 1 × fixed 100Base-FX fibre port, AC 100–240 V or redundant DC 12–36 V / 36–56 V input, -40 to +75 °C (wide-temperature version), IP40 DIN-rail housing.
Who it is for
- CCTV installers with remote camera points — Up to 4 IP cameras (or 3 cameras plus a local device) at a pole or gate, brought back to the control room on one fibre: multimode 2 km or single-mode 20/40/60/120 km, far beyond the 100 m copper limit. Cameras need their own PoE injector or power, the switch has no PoE.
- Factories and PLC / SCADA panels — A 32 mm wide unit that clips next to the PLC, HMI and I/O on the same DIN rail, takes the panel's 24 V DC supply on redundant inputs and links the panel to the plant network over fibre, which is immune to motor and VFD interference on the cable run.
- Utilities, pumping stations and substations — Small remote stations with a meter, an RTU and a camera: the DC 48 V version (-DCH, 36–56 V) runs from a 48 V battery plant, and EN61000-4 Level 3 immunity (ESD, surge, EFT) suits electrically noisy sites.
- Traffic and ITS roadside cabinets — Signal controllers, detectors and an intersection camera in an unheated cabinet: the wide-temperature version is rated -40 to +75 °C, and one fibre to the next node replaces a long copper run.
- System integrators and distributors — Plug-and-play, nothing to configure on site, and one SKU per supply voltage (-AC, -DCL, -DCH); neutral casing and OEM / project customisation are offered on the page.
Where and how to install
- DIN rail in a closed cabinet — The housing is IP40: dust-protected, not water-protected, so outdoors it must sit inside a weatherproof enclosure. Clip it onto a 35 mm rail (wall mounting is optional), leave space above and below the 144 mm tall body for air, and keep it away from heaters, transformers and contactors.
- Wire the DC inputs correctly — The 4-pin terminal on -DCL / -DCH takes two independent supplies (P1 and P2); feed them from two power supplies or a supply plus battery so one failure does not drop the link. Check the range before switching on: -DCL 12–36 V, -DCH 36–56 V; reverse-polarity protection prevents damage from swapped wires, but the switch will not run until they are corrected.
- AC version: single input — The -AC model accepts 100–240 V AC on a single input, so it has no supply redundancy. Put it behind a small breaker and an AC surge protector in the cabinet, and use the DC versions with two supplies where downtime is not acceptable.
- Ground the cabinet and protect copper runs — Bond the DIN rail and cabinet to the site earth. Fibre carries no surge, but any RJ45 cable that leaves the cabinet to a camera on a pole should get an Ethernet surge protector at both ends, and copper runs must stay within 100 m.
- Fibre handling — The fibre port is fixed at the factory: connector (SC, ST or FC), single- or multimode, single or dual fibre and reach are chosen at order and cannot be changed on site. Terminate the cable in a small splice box, use a patch cord with the matching connector, keep the bend radius generous and fit dust caps on unused ends.
- Temperature and condensation — Order the wide-temperature version (-40 to +75 °C) for outdoor cabinets; the standard version is rated -10 to +60 °C. Humidity is rated 5–95 % non-condensing, so in humid or coastal sites seal cable entries, add a drain or breather and an anti-condensation heater if the cabinet cools sharply at night.
Ports and link planning
The ZJIES1000D-4T1S is an edge node: 4 copper devices share one 100 Mbps fibre uplink. There is no second fibre port, so it ends a line rather than forming a ring; for a pass-through chain use the ZJIES1000D-3T2S (2 fibre ports), and for Gigabit fibre the ZJIES1000D-4GT1F.
| ZJIES1000D-4T1S | |
|---|---|
| Copper ports | 4 × 10/100Base-T RJ45 |
| Fibre port | 1 × fixed 100Base-FX · SC/ST/FC · single/dual fibre |
| Fibre reach | MM 2 km · SM 20/40/60/120 km |
| Cameras at 6 Mbps each (assumed) | 4 → ~24 Mbps of 100 Mbps |
| PoE | — |
| Ring redundancy | — (unmanaged) |
| Power input | -AC 100–240 V AC · -DCL 12–36 V DC ×2 · -DCH 36–56 V DC ×2 |
| Power consumption | Max. 4 W |
| Operating temperature | -10 ~ +60 °C (std) · -40 ~ +75 °C (wide) |
| Housing / size | IP40 metal · 32 × 144 × 95 mm |
| MAC table / buffer | 4K / 1 Mbit |
- Pick multimode (2 km) for links inside one factory or campus; pick single-mode 20 km or more for roadside, perimeter or between buildings beyond 2 km.
- Pick single-fibre when only one core is free in the cable, and order the two ends as a matched pair; pick dual-fibre when two cores are available.
- Pick -DCL for 24 V panels, -DCH for 48 V telecom or battery plants, -AC where only mains is available.
Values from the manufacturer's ZJIES1000D-5 series datasheet. The camera line assumes 6 Mbps per camera (main plus sub stream); check your cameras' actual bitrate.
DIN-Rail Fiber Switch FAQ — ZJIES1000D-4T1S
What is the port layout of the ZJIES1000D-4T1S?
It combines 4 x 10/100Base-TX copper ports with 1 x fixed 10/100Base-FX Fast Ethernet fiber port. The standard build ships with a single-mode, dual-fiber SC module, and SC, ST or FC connectors are optional — a simple way to pull four field devices onto one fiber uplink.
How far does the fiber port reach?
Multimode versions cover 2 km; single-mode versions are optional at 20, 40, 60 or 120 km. Specify the distance class when ordering so the optics match your actual span — from a campus link to a long inter-site run, no repeaters needed.
Which power versions can I order?
Two versions are offered side by side: DC 12–26V with dual redundant terminal-block input, or AC 220V (100–240V) single input — pick whichever supply already exists at the site. Both include reverse-polarity and overload protection and draw a maximum of 4 W.
Do I need to configure anything?
No configuration at all — it is an unmanaged plug-and-play switch with store-and-forward switching, a 4K MAC address table and 1 Mbit packet buffer. Power, copper and fiber LEDs let a technician verify the installation in seconds without a laptop.
Is it rugged enough for outdoor field cabinets?
Yes. It operates from -40 to +75°C (storage -40 to +85°C, humidity 5–95% non-condensing) in an IP40 metal case of 32 x 144 x 95 mm, DIN-rail mounted with wall mounting optional. EN61000-4 Level 3 EMS immunity, IEC60068 shock/vibration compliance, 320,000-hour MTBF and a 5-year warranty.
Will the ZJIES1000D-4T1S fibre port link to a Gigabit SFP or a 1000M media converter at the other end?
No. Its fibre port is 100Base-FX (100 Mbps) per the datasheet, and fibre ports do not auto-negotiate speed, so the far end must also be 100Base-FX with the same fibre mode, connector type and wavelength. A 1000Base-X SFP will not link to it even though the cable fits. If the core network side only has Gigabit SFP slots, use the Gigabit sibling ZJIES1000D-4GT1F or a 100M fibre media converter at the head end.
How many IP cameras can I put behind one ZJIES1000D-4T1S?
Up to 4, one per RJ45 port, and bandwidth is not the limit: at an assumed 6 Mbps per camera (main plus sub stream) four cameras use about 24 Mbps of the 100 Mbps fibre uplink. The switch has no PoE, so power the cameras with PoE injectors or a 12 V supply in the cabinet, or use a PoE model such as the ZJIES1000D-P-4PT1T-DC. Keep each camera cable within 100 m.
Can several ZJIES1000D-4T1S switches be chained or put in a fibre ring?
Not with fibre: each unit has only one fibre port, so it can only be the end of a point-to-point link back to the core. It is also unmanaged with no RSTP or ring protocol, so never connect two paths between the same switches or you create a broadcast loop. For a fibre chain use the ZJIES1000D-3T2S with 2 fibre ports, and for a self-healing ring use a managed ZJIES3000D model.
What does single-fibre vs dual-fibre mean when ordering the ZJIES1000D-4T1S?
Dual-fibre uses two cores, one to transmit and one to receive, and both ends are identical. Single-fibre sends and receives on one core using two different wavelengths, so the two ends are a matched pair (often called A and B) and must be ordered together; two identical single-fibre units will not talk. Tell us the far-end device when ordering so we match mode, connector, reach and wavelength.
Can I use VLANs, SNMP or remote monitoring on the ZJIES1000D-4T1S?
No. It is an unmanaged plug-and-play switch with no web interface, VLAN, SNMP or alarm relay listed; status is shown only by the power, copper and fibre LEDs. It passes tagged traffic from upstream equipment but cannot separate it. If you need to segment cameras from control traffic or monitor the link from the control room, choose a managed ZJIES3000D model.
What power connector does the ZJIES1000D-4T1S have, and do I need to confirm it before ordering?
Yes, please confirm the power connector with us before ordering. For Zhongxin Shutong products the power input type and connector can differ between versions and batches, so tell us your supply (AC or DC and the voltage), how you will wire it in the cabinet and your country's plug standard, and we confirm the exact connector and supply version of the ZJIES1000D-4T1S for your order.
Can I order one unit first, and how does it reach my country?
Yes — a single sample can be ordered and sent by air. For larger orders we deliver EXW or FOB to your freight forwarder's warehouse in China, or arrange air or sea freight to your country on request. Every shipment comes with a commercial invoice and packing list for customs; import duties and VAT in your country are not included unless agreed in writing.
How do I pay?
By bank transfer (T/T) in US dollars against our proforma invoice, which lists the model, quantity, unit price, delivery terms and lead time. You can check our company details on the verification page before you pay.
Our own line — Zhongxin Shutong industrial switches1,500 m² clean rooms100% port-by-port tested-40…+75 °C rated, cycled to +85 °CEN 61000-4 Level 3 EMC immunitySerial-number traceability on every unitISO 9001 · 14001 · 27001 · CMMI L3See the factory →See all certifications →
Every order, any brand: there is no return policy — defective units are covered by free spare units agreed per order and written into the quotation. Warranty up to 5 years on the Zhongxin Shutong industrial line, manufacturer warranty on other brands. Terms, warranty & RMA
Related Products
ZJIES1000-G
Unmanaged · Gigabit Series
ZJIES1000D-M-5TX
Unmanaged · 5-Port Wall-Mount IP65
ZJIES1000D-S-8GT
Unmanaged · Compact 8-Port Gigabit
ZJIES1000D-22T4GB
Unmanaged · 22-Port + Gigabit Fiber
ZJIES1000D-8GT
Unmanaged · 8-Port Gigabit Copper
ZJIES1000D-6GT3GB
Unmanaged · 6-Port + Fiber
ZJIES1000D-8GT2GB
Unmanaged · 8-Port + Fiber
ZJIES1000D-8T-DC
Unmanaged · 8×FE Copper (no fiber)
Request a quote for this product
An engineer replies within 24 hours on working days with model check, price and lead time. No obligation, no newsletters.
Product: ZJIES1000D-4T1S
For a fast, exact quote tell us: model or requirement · quantity · destination country / port · EXW or FOB · deadline.