Manufacturer product photo · 6 copper + 4 fixed Gigabit fiber ports

S8G02G2GFI

Name: Atlas S8G02G2GFI
Brand: Atlas

Atlas · Unmanaged PoE · Full Gigabit + 2×SFP

8x Gigabit PoE + 2x Gigabit RJ45 + 2x Gigabit SFP uplink, 96W/120W budget -- copper and fiber together for extra headroom and path redundancy.

Project-Based Pricing

Volume & combo discounts — get your quote

In-stock models: 3 days to your designated warehouse after payment · Out-of-stock or insufficient stock: 7–15 working days

✓ Project-level customization & OEM supported

Get Best Price on WhatsApp Need the PDF datasheet? Get it on WhatsApp →

HOW TO GET A BETTER PRICE

Volume DiscountOrder 50+ pcs of this model

Project Combo DiscountMix any categories & models storewide in one order — no quantity limit

BIGGER

Verified End-User DiscountEnd user with a real project? Send your requirements / BOQ — best price, plus professional system design & planning advice

BIGGEST

All discounts are quoted personally — message me on WhatsApp ↑

Overview

The S8G02G2GFI/GFID is the full-gigabit flagship of the 8-port line: 8 Gigabit PoE ports paired with 2 Gigabit RJ45 uplinks and 2 Gigabit SFP slots, so a project with high-bitrate 4K cameras and a fiber backbone can use both at once. Run the RJ45 uplinks to a nearby switch and the SFP ports to two separate fiber runs for path redundancy, or split camera traffic across copper and fiber to keep any single link from getting overloaded. Every PoE port still delivers up to 30W under IEEE 802.3af/at, and the fanless metal case keeps it silent under load. Choose the 96W S8G02G2GFI for typical loads or the 120W S8G02G2GFI, which adds a watchdog auto-reset, for heavier PTZ/IR loads.

Is This the Right Fit?

Six real deployment scenarios matched to this model's actual datasheet specifications.

Multi-Story GuesthousesFiber riser between floors on the SFP ports, ground-floor lobby cameras on the RJ45 uplink.

Farms with Several BuildingsHouse, barn and storage shed each on their own fiber run into the two SFP ports for a redundant path back to the office.

Construction Site Command CentersTemporary office linked to two separate site trailers over fiber, cameras on gate and material yard on copper.

Small School Campuses (Two Blocks)Fiber uplinks connect the classroom block and the admin block back to a shared NVR closet.

Gas Stations with a Car Wash BayFiber uplink to the wash bay switch, copper uplink handles the main forecourt cameras.

Small Clinic Outbuilding ClustersFiber connects a detached ward or lab building back to the main NVR room over two redundant SFP paths.

Not a good fit if:

Not a managed switch -- no VLAN segmentation, spanning-tree, or web management interface. Choose a managed model if the project needs VLANs or loop-prevention protocols.
No ring-network redundancy protocol -- built for star, tree, and bus topologies, not self-healing ring recovery.
Commercial -10°C to +70°C rated in a desktop/wall-mount metal case without 19-inch rack ears -- not for extreme industrial wide-temperature sites or standard 19-inch rack rows.

Key Features

IEEE 802.3af/at PoE+, 30W per Port — Delivers up to 30W on every port -- runs PTZ domes, IR-illuminated cameras, and PoE access points with no separate injector.
Smart Powered-Device Detection — Identifies a genuine PD before energizing the port, so a miswired cable or non-PoE device won't get fried and idle ports don't waste power.
All-Gigabit Access + RJ45/Dual SFP Uplink — Run copper and fiber together, or split traffic across two paths for extra uplink headroom.
Gigabit to Every Camera — Full 1000M on all PoE ports, so 4K and multi-sensor units keep their frame rate instead of dropping to 100M.
One Cable for Power and Data — No separate power run to pull -- camera power and video ride the same Cat5e/6 cable, cutting cable cost and install labor on every point.
Fanless, Silent, Maintenance-Free — Sealed metal enclosure with zero moving parts -- silent, dust-tolerant, and maintenance-free tucked in a back office, ceiling void, or equipment cabinet.
96W or 120W, Watchdog on the High-Power Version — Available in 96W and 120W PoE power budgets, with the 120W version adding a watchdog auto-reset for heavier PTZ/IR loads -- pick the version that matches the job.

Specifications

Ports & Interfaces

PoE Ports	8x 10/100/1000Base-T (RJ45), IEEE 802.3af/at
Uplink Ports	2x 10/100/1000Base-T (RJ45)
Fiber Uplink	2x 1000Base-X SFP slots (dual fiber uplink / path redundancy)
Switching Mode	Store-and-forward

Switching Performance

Switching Capacity	28 Gbps
Forwarding Rate	20.832 Mpps
MAC Address Table	4K
Standards Supported	IEEE 802.3, 802.3u, 802.3ab, 802.3x

PoE Power

PoE Standards	IEEE 802.3af / IEEE 802.3at
Max Power per Port	30W
Cable Distance	Standard 100 m per segment (IEEE 802.3 copper limit)
Powered Device Detection	Automatic; smart detection protects non-PoE devices
PoE Mode	Mode A (power over data pairs)

Switching Features

Topology Support	Star, tree, and bus network topologies
Traffic Control	Supported
Duplex / Auto-Negotiation	Full/half duplex, auto MDI/MDI-X, auto-negotiated speed
Chipset	Chipset options available on a project basis

Physical

Dimensions	240 × 150 × 44 mm
Housing	Metal, fanless
Cooling	Fanless (0 fans)
Protection Rating	IP30
Mounting	Desktop or wall-mount

Power Input

Input Voltage	AC 176V - 264V (100-240V adapter compatible)
Power Supply	Built-in power supply, DC 52V 2.3A

Environmental

Operating / Storage Temperature	-10 degC to +70 degC
Humidity	5% to 95%, non-condensing
Ingress Protection	IP30

Indicators & Reliability

LED Indicators	PWR (power), PoE status (red), Link/Data (blue) per port
Watchdog Auto-Reset	Available on the high-power (D) model; standard model has no watchdog
Device Compatibility	Mainstream IP cameras, wireless APs, video intercoms and other standard 802.3af/at powered devices
MTBF	50,000 hours (manufacturer figure)

Package

Units per Carton	20 units/carton
Packing Dimensions	275 × 210 × 50 mm
Unit Weight	1.1 kg per unit
Box Contents	Switch × 1, power cord × 1, manual × 1, certificate × 1, warranty card × 1

Models & Ordering

Model	Product Description	Price
S8G02G2GFI	Standard 96 W PoE budget — fits typical fixed cameras, wireless APs and video intercoms.	✆ WhatsApp
S8G02G2GFI	High-power 120 W version — for PTZ domes, IR illuminators and other heavy loads. This version also adds a hardware watchdog that auto-resets the switch if it hangs under load.	✆ WhatsApp

One model, two PoE power versions. Both share the same ports, housing and features; the 120 W version raises the total PoE budget and adds a hardware watchdog for heavy loads. State the power version you need when ordering.